Fieldmann FZP 2002-E Provozní pokyny stáhnout pdf (Strana 22)

FZP 2002-E

22EN

Putting into service | Instructions for proper use

ATTENTION! Keep other persons away from work area.

Turning on

Firmly take hold of front handle with your left hand

Firmly take hold of rear handle with your right hand.

Press and hold switch safety lock with your thumb and press the switch with your foreﬁnger.

Turning off

Saw is turned off by releasing the switch.

If the saw does not stop, release chain brake and unplug power cord.

13. INSTRUCTIONS FOR PROPER USE

Chain sharpening with a ﬁle

ATTENTION! Poorly sharpened teeth edges increase the risk of recoil!

General instruction on saw sharpening

Never cut wood using a saw with blunt chain. In case it is necessary during cutting to

apply more strength, the reason is that chain teeth are blunt. Another indicator of saw blunt is

generating sawdust instead of shavings.

At cutting, sharp cuts generate large shavings and penetrate wood smoothly.

The chain part that do cutting is called a cutting link. It consist of a tooth (Fig. 21, A)

and depth gauge (Fig. 21, B). The difference between those two elements is key for cut depth.

When sharpening saw with a ﬁle, pay attention to:

- upper slice angle

- cut angle

- horizontal ﬁling angle

- ﬁle diameter

- ﬁle depth

More detailed information can be found in section „Technical Data“.

Saw chain ﬁling is quite demanding without respective tools. We recommend you to use a special

ﬁle holder. Its use guarantees sufﬁcient sharpening and thus reduces the risk of recoil.

Chain teeth ﬁling

To sharpen teeth properly you need to use a round ﬁle and ﬁle holder.

To get the right ﬁle parameters and its holder see section „Technical Data“.

File the saw just when it is properly tightened. Loose chain makes ﬁling harder.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 133 134

Žádné komentáře

Fieldmann FZP 2002-E Provozní pokyny Strana 22